KNX-DALI-2 Gateway, 1_2-Fold

The KNX-DALI-2 Gateway, 1_2-Fold is designed for EIB/KNX intelligent building control system and used to connect KNX bus and DALI bus, as the interface between KNX installation system and DALI network.

The main functions of the KNX-DALI-2 Gateway, 1_2-Fold are summarized as follows:

² 64 DALI devices per channel, each DALI device can be individually switching, dimming, set brightness value, colour control, etc.

² Multiple device types are available, such as DT6-LED dimming control device, DT8-colour control device, colour control type including RGB Colour, RGBW Colour, XY Colour, Colour Temperature

² Group control: up to 16 different groups for each channel. Assign DALI devices to groups via the DCA. And switching, dimming control, colour control for each group

² 16 different DALI scenes for each channel. And the brightness value of scenes are configured by the DCA

² Group scenes or global scenes in DALI channels can be recalled via KNX scenes

² Broadcast control: switching, brightness, colour temperature, colour control for all DALI devices of a channel

² Operation mode: support normal mode, normal/night mode, staircase mode, permanent mode, burn in mode

² 8 behaviour templates for group and ECG action setting and a ECG configuration which can be modified by the DCA

² Send or response various status, such as switch, brightness, operation hours etc.

² Fault detection of lamps and ballasts for DALI devices

² Monitoring DALI bus voltage, DALI bus current and DALI bus short circuit status

² Support the KNX Data Secure